Published by John Coonrod
先进电子解决方案
This post authored by John Coonrod originally appeared on the ROG Blog hosted by Microwave Journal.
选择高频电路板材料通常需要衡量成本和性能等多项因素。对印刷电路板 (PCB) 材料进行分类时，可首先从介质系数 (Dk) 着手，这是层压板材料的一项基本特性，也是需要在不同 PCB 材料供应商之间进行许多比较的特性。
The dielectric constant of a laminate refers to a measure of the capacitance or energy between a pair of conductors in the vicinity of the laminate compared to that pair of conductors in a vacuum. The value for a vacuum is 1.0, with all other materials having a value somewhat higher than that. A laminate with higher values of Dk can store more energy than materials with lower Dk values. But at higher Dk values, electromagnetic energy will flow at a slower rate through the conductors (lower frequency).
Several earlier blog posts addressed different approaches available to measure the Dk of PCB materials. These methods involve different test fixtures and circuit configurations, such as the clamped stripline resonator test method and the full sheet resonance (FSR) test. Unfortunately, depending upon the laminate being measured and the frequency, these methods can reveal very different values of Dk for the same material under test.
For that reason, Rogers Corp. has developed alternative sets of dielectric-constant values, Design Dk values, to represent the company’s laminates during the design and engineering stages. These are Dk values that can be used reliably and accurately within commercial computer-aided-engineering (CAE) software tools. The Design Dk values are measured by yet other measurement techniques, the differential phase length method. The approach is based on fabricating two microstrip circuits of significantly different length on the same laminate and in close proximity, identical in every way except for length. The test method measures the transmission characteristics of a quasi-transverse-electromagnetic (quasi-TEM) wave propagation and its phase response for a pair of microstrip transmission line circuits. By comparing the expected phase of the lines for a given frequency with the measured results, it can be possible to calculate the Dk for the laminate. In this approach, a large difference in length, such as 1:3, is recommended to simplify the measurements; the shorter circuit will limit the low-frequency accuracy.
But rather than just take Rogers’ word for it, it is also possible to apply the differential phase length method to a laminate of choice to determine its Dk firsthand. For those interested, Rogers Corp. now offers free downloadable software, Rogers’ Microstrip Dk Calculator Software, to determine PCB Dk values. The software works with the aid of associated test equipment, such as a microwave vector network analyzer (VNA). A high-quality test fixture should be used with the same signal launch for both circuits under test. The software can gather data from the measurements and produce a plot of Dk versus frequency, of particular value to designers of broadband circuits wishing to know the dielectric constant of the laminate beyond a certain operating frequency range. The range of frequencies across which this method can test depends on the lengths of the circuits, the return loss between the test fixture and the analyzer, and a number of different network analyzer parameters. The accuracy of the measurements depends on these different parameters and the length ratio between the two transmission lines. In addition to the software, an operator’s manual for performing the measurements can also be downloaded for free. The user’s manual provides details about the test method and why it tends to provide reliable results for Dk values.
These Design Dk values are generated for all of Rogers’ commercial laminates, based on this measurement method. The Rogers Microstrip Dk Calculator Software is available online for free download from the Rogers Technology Support Hub, which also includes technical papers and videos and several calculators, including the latest version of the MWI Microwave Impedance and loss calculator, MWI-2017. This free downloadable software tool features an improved grounded coplanar model and added capability to display the Design DK for any of Rogers’ products in the calculator when using the microstrip model.
Visitors to the Rogers Technology Support Hub can also download a copy of the ROG Converter software, a web-based application designed for a tablet or smartphone. It can provide simple conversions of dimensions from metric to English units and back, for temperature, for copper thickness, for CTE, and for thermal coefficient of dielectric constant (TCDk). Recently added conversions include for return loss: as VSWR, mismatch loss, and reflection coefficient. Based on Rogers’ materials, it can also help when planning multilayer material stack-ups.
您有设计或制造方面的问题吗？立即登录罗杰斯技术支持中心并“咨询工程师”。
标签：
罗杰斯博客
发布于 2018 年 9 月 11 日
